Loop Detector and Loop Cable Application

Loop detector and loop cable are two inseparable products. Vehicles and metal objects can be safely identified by a loop embedded in the driveway, consisting of several coils of copper wire and an inductive loop analyzer of the LOOP-series. The inductance range of the coil is 100-300uh for the vehicle.

What's Loop Detector and Loop Cable Application?
JUTAI loop detector has 4 types.
Model:LD-100 single channel loop detector voltage is 100-240VAC

LD-100 100-240VAC Loop Detector

LD-100 loop detector
Model: LD-102 single-channel loop detector voltage is 12-24VADC

LD-202 Single Channel Loop Detector

LD-102 Loop detector

Model: LD-200 dual channel loop detector voltage 100-240VAC

LD-200 Dual Channel Loop Detector

LD-200 dual channel loop detector

Model:LD-202 channel loop detector voltage 12-24VADC

LD-202 Vehicle Loop Detector

LD-202 dual channel loop detector

JUTAI Loop Cable

It has excellent corrosion resistance, oil resistance, strong acid, strong alkali resistance, a strong oxidant, etc; With excellent electrical insulation properties, resistant to high voltage, small loss at high frequency, no moisture absorption, insulation resistance; It has excellent flame resistance, aging resistance, long service life.

JUTAI loop detector cable

Loop cable
Loop installation

The individual cores should not shift against each other. The loop geometry must not be allowed to change. If possible, the installation should be kept away from any metal objects.

Number of coils in the loop

Loop Perimeter Cylinder Number

3-4M 6

4-6M 5

6-10M 4

10-20M 3

20M-UP 2

loop detector with loop cable

The feed line should be twisted 25 times per meter.

Loop geometry Application

The loop-width should be equal to or slightly smaller than the widest vehicle passing over the loop. It is better not to press all the wheels of the car or truck onto the loop cable.
loop detector for car
In order to detect two-wheeled vehicles, the loop should be set up as a trapezium or a parallelogram. single loop detector
With a two-channel loop-detector, it is possible to activate direction detection. The distance between the loops should then be half the length of the vehicle. More used for one road vehicle need to entrance and exit.
dual loop detector
Email:jutaisales1@gmail.com sales9@jutairfid.com