Barrier Gate Working With Jutai Products

2019-03-01

 Barrier Gate Working With Jutai Products

Barrier gates are typically found at level crossings, parking facilities, checkpoints and entrances to restricted areas. They are also the usual method for controlling passage through toll booths, and can also be found on some freeway. entrance ramps which are automatically controlled to drop to restrict traffic in the event of accident cleanup or road closures without the need to dispatch road workers or law enforcement to use a vehicle to block the way. Some barrier gates are automatic and powered, others are manually operated. In some places, boom gates are installed across suburban streets as a traffic calming measure, preventing through traffic, while allowing to take advantage of the shorter and more direct route authorized vehicles such as emergency services and buses.

Barrier gate project

Automatic boom barrier gate can be operated through Jutai Products

1. Loop Detector

2. RFID tags / RFID reader / Proximity reader / UHF long range reader

3. Push button

4. Parking management system

5. Remote control

How is barrier gates working with JUTAI loop Detector

When you approach car park boom gate, you may notice a rectangular where the road surface has been cut with a saw and then re-sealed. This is the sensor loop. The loop consists of several turns or wire buried in the roadway and connected to an electronic circuit which can detect a car passing over it. Normally the loop is about 2m x 0.8-1m in size. sensor loop type can detect a different type of car such as Bicycles, cars, forklifts, trucks or truck/trailer combinations with drawbars are detected with precision.  When a loop detector detects a car on the loop. the give a reply to a barrier gate controller No / NC port. Barrier gates will automatically open or close.

barrier gate working with loop detector

How is barrier gates working with RFID tags / RFID reader

All the resident vehicles have to first register with the management committee and gate an RFID tag placed on their vehicle. An RFID reader tag is installed on the boom barrier, which is placed at the entrance of the community. When a car is about to enter the community, the RFID tag on the vehicle is read by the reader tag on the boom barrier and the barrier gate opens, letting the vehicle in, In case of a vehicle that is not registered with the community, the barrier gate will not open.

Barrier gate working with rfid reader

barrier gate with  active long range reader

How is barrier gates working with the parking management system?

The parking management system is found at department, parking facilities, checkpoints, and entrances to restricted areas. When a car is about to enter the community. the driver gets a ticket or IC card one the parking entrance terminal and the barrier gates open, letting the vehicle in. When the driver finished payment then returns back a ticket or IC card one the parking exit terminal and barrier gates open, letting the vehicle out. 

barrier gate parking management system

How is barrier gates working with push button and remote control?

Push button and remote control are manual open or close barrier gate. When a car wants to pass the barrier gate, the manager will use the remote control or push button to open or close barrier gates.

barrier gate working with push button

Our company supplier different barrier gate solutions for barrier gate clients. One-stop service.

More information contact:

 

WhatsApp:+8615992504234

Skype:MandyChan0515

Wechat: MandyChan0515

Email:jutaisales1@gmail.com 

Website:https://www.jutaigateaccess.com/  http://www.jutairfid.com/

 

 

 

 

 

 

 

Share this Post:

Get in Touch with us

Fill out more information, We will get back to you within 24 hours.

Factory Address

5F,Mingjinhai Industrial Park, ShiyanTown, BaoAn,Shenzhen,China

Email

jutaigateaccess2@gmail.com

Contact Us

Telephone : 86-0755-29573855

Business Phone : 8613143400257

Work Time :8:00-18:00(Beijing time)

contact us