IR-20 infrared photocell beam sensor for gate door

IR-20 infrared photocell beam sensor for gate door

Product description

When it comes to keeping your automated gate safe JUTAI infrared sensor is the way to go. Have peace of mind knowing your family and vehicle will be protected from the occasional mishap that can sometimes occur. One or two carefully placed sensors can keep your automatic gate opener from closing accidentally on a vehicle or more importantly on a person. Having a wired sensor is more reliable and you don't need to worry about changing batteries. The JUTAI infrared sensor can be powered with 12/24 dc or ac voltage which can be conveniently powered off any ALEKO low voltage automatic gate opener. With over a 20-foot range, this sensor can be used on virtually any residential or commercial driveway.

What is an infrared photocell sensor? Photoelectric safety sensors for personnel safety. Together with the appropriate safety control units, active photoelectric protective devices such as safety thru-beam sensors and safety light grids ensure that a stop is applied on detection of unauthorized access or if someone reaches into a danger zone. JUTAI IR-20M infrared photo beam sensors with 20m distance for sliding gate.

IR-20 infrared photocell beam sensor with 1-20m distance for sliding gate has been widely used in the sliding door access control system. Infrared photo beam is usually installed on both sides of the sliding door. One side is the transmitting end and the other side is the receiving end. When the infrared beam detects the person or the car passes by.will give a signal to the sliding door control gate system, the sliding door control system is better than the signal given by the infrared radiation, it will keep the door in a door open state, to ensure the safety of people or cars. It's best to place the Photocells as close to the gate as possible to reduce the chance of this happening.

JUTAI's infrared photo beam installation is very simple, it is compatible with 12VAC / DC and 24VAC / DC voltage, no matter what voltage your door machine is, a product can be easily handled, reducing inventory pressure. In addition, JUTAI  infrared radiation support one-on-one working state and one-to-many working state. If the case is one-to-one, we provide a jumper cap. Just insert the jumper cap according to our operating instructions. The location and the operating current in AC mode make it easy to implement the functional mode you want.

Applicaton area

1.Boom barrier gate safety application

2.sliding gate

3.Swing gate

4.Garage Door

5.Gate opener system

6.Security Alarms and Warnings system

7.Home Security

8.gate operator safety accessories

Specifications

IR-20 infrared photocell beam sensor display