UHF Reader/Writer with 860-960mhz Frequency

UHF Reader/Writer with 860-960mhz Frequency and Compile with The Standard of EPC C1G2 ISO 18000-6C

Product Description

UHF Reader/Writer with 860-960mhz Frequency and Compile with The Standard of EPC C1G2 ISO 18000-6C is a high performance integrated UHF long range reader. it supports fast tag read/write operation with a high identification rate. and the wiegand26 interface can directly connect to a controller device to build an access control system. It can be widely applied in many RFID application systems such as logistics, access control( Door Control, Car Parking control .etc.) and anti-counterfeit and industrial production process, control system.

JUTAI integrated UHF long range RFID reader use UHF band RFID technology with operating frequency 860-868Mhz or 902-928Mhz, which can be adjusted based on the different countries frequency regulation. For example, Malaysia uses 919-923Mhz, United Arab Emirates and Oman use 865.6-867.6Mhz, India uses 865-867Mhz, Indonesia uses 923-925Mhz, etc. JUTAI has UHF program software for all these settings: frequency range, interface WG26/34/RS232/RS485, ground sensor working mode, or initiative working mode.

Application area

1.Hands-Free Long Range Parking Access Control System

2.Automatic Gate Entrance Access Control System

3.Long Range Rfid Gate Entrance Reading System

4.Hands-Free Gate Access Control System

Specifications

UHF Long Range Reader Ordering Information

• PUHF-9B-12db reader complete with power supply and mounting bracket 

• JTPUHF-L1 Passive Sticker

• JTPUHF-L2 Passive Tag

• JTU6C-9B Passive UHF Card

• CU-59 UHF card+13.56MHZ dual frequency card

• DU-96 UHF card_125MHZ dual frequency card

• CS-56 Card Sticker

Commissioning

1. Readers should not face to each other to avoid reading conflicts.

2. The distance between two readers is at least 2.5m

3. U-shaped mounting bracket can be used to adjust the angle of the reader in order to achieve the best reading distance.

4. Power up: When powered on, the buzzer will 'Didi' even rang twice, then the device to work. If you do not hear the sound, check the power supply is connected correctly.

5. Reader Test: Let the cards in front of the reader to move around. After reading card  Number, the buzzer will sound and the red LED will blink inside the panel.

6. Do not stick the card in the palm of the hand or on the body, and do not use the card posted on the metal object, it will affect the reader results.

UHF Reader display