Door Opener Loop Detectors For Boom Barrier Gate

LD-100 Door Opener Loop Detectors With High Sensitivity For Boom Gate

JUTAI single channel loop detector is compatible with the parking management system, easy installation and operation, factory price and fast shipping. with high quality as the reno loop detector.  JUTAI as the single channel loop detector supplier has really worked on what's best for the commercial garage door opener parts and gate access solution. JUTAI vehicle loop detector with high sensitivity for barrier gate is the best for the gate access solution. And it is suitable for parking, highway toll station, and traffic signal control, etc. The detector is a single channel loop detector, which only can simultaneously monitor an inductance coil. It has two relays to output signals, so the user can choose a different output signal to control the mechanical drive, the card device or vehicles counting.

LD-100 LD-100 Door Opener Loop Detectors Technical parameter

• Self-turning range:  20-2000μH
• Sensitivity:  8 levels,(0 is lowest, 7 is highest)
• Frequency:  Four step switch selectable 20-80KHz
• Power Requirements : 110-240VAC (48 to 62Hz) / 12-24VADC(48 to 62Hz)
• Operation Temp:  -40℃ to +70℃ / (-111℉ to +158℉)
• Fault Output: Blinks slowly( It maybe because the loop is short circuit or the No. of turns is not enough).  Blinks faster (It maybe because the loop is open or the No. of turns is too many)
• Response Times: Turn-on 10-90MS / Turn-off 10-90MS
• Visual Indications:  Power LED-Red / Channel LED-Green
• Reset:  Reset by push button on front of enclosure
• Relay Output:  Presence Relay/Fault Relay
• Humidity:  Up to 95% relative humidity without condensation
• Loop wire: more than 10meters requires the use of a 2 core shield cable,do not exceed 30 meters distance between control box and loop
• Size: 75mm*43mm*110mm

Loop Detector Sensitivity Selection
The sensitivity of the loop can be adjusted by the trimpot labeled “Sensitivity”. User can select 4 different setting by turning the trimpot with 0 being the least sensitive and “4” being the most sensitive. 
Loop detectors in recent years have become a popular tool having innumerable applications in policing, right from surveillance operations to traffic control. Automation of gates and doors has become a popular usage of the loop detector.
The JTLD-102 vehicle loop detector is compatible with most gate operators. The JTLD-102 may be used in Center, Safety and Exit loop positions. Fifteen sensitivity settings allow for fine adjustment of the detection level.

Loop Detector Wiring Diagram

Selling Points

Two relay output.

Loop frequency indication.

Presence/Pulse output mode.

Easy to install and perform the function

Ordering Other Related Products

High-Quality Loop Cable 305m/roll

Photocell Beam Sensors 1-20m

LED Traffic Light 100mm 110-240V or 12-24V

Automatic Barrier Boom Gate 1-6m

RFID Long Range Card Reader and card access system

Car Park Card Dispenser Loop Detector System

Loop Detector Vehicle Counting System

Loop Detector Wiring Diagram Installation

Door Opener Loop Detectors