Automatic Ground Vehicle Loop Detector Parking Lot Management System
Automatic Ground Vehicle Loop Detector With Presence and Pulse Relays
JUTAI single channel loop detectors are used for detecting the presence or the passage of a vehicle over an inductive wire loop inserted in the roadway surface. jutai created LD-106 single-channel loop detector troubleshooting vehicle detector with features of Failsafe outputs and Automatic Tuning. One presence relay and a second relay which can be configured as presence, pulse on entry or pulse on exit. Operates on 110VAC.
Automatic Ground Vehicle Loop Detector Specifications
|Frequency range||Four step switch selectable 20-80KHz|
|Sensitivity||16 way selectable /Highest 0.010% DL/L / Lowest 2.56% DL/L|
|Operating temperature||-40℃ to +70℃ / (-111℉ to +158℉)|
|Relative humidity||Up to 95% relative humidity without condensation|
Automatic drift compensation
|Output mode||Presence Relay/Fault Relay output|
|Visual Indications||Power LED-Red / Channel LED-Green|
|Integral Fault Relay||provide an output in the event of a loop fault condition.|
Automatic Ground Vehicle Loop Detector 11-PIN connection
Loop Installaion instruction
One channel loop detector.
No warm-up time required.
Self –tuning and complete environmental tracking.
Four selectable loop frequencies to eliminate crosstalk.
All permanent loop installations should be installed in the roadway by cutting slots with a masonry cutting disc or similar device. A 45° crosscut should be made across the loop corners to reduce the chance of damage that can be caused to the loop wire insulation at right angle corners.
Loop detectors are used to detect the presence of vehicles. The loop is connected to the detector. find more LD-100 specifications here.
Exit loops are used to open gates to allow a vehicle's exit.
Safety loops are used to prevent a gate from closing on a vehicle. Two loops can be wired to one detector. This is frequently the case in safety loops. Loops are placed in front and behind the gate.
Shadow Loops are typically used in commercial locations. They close the gate as soon as a vehicle passes over them deterring other vehicles from tailgating in behind them.
1) Parking lot entrances vehicle detection.
2) Parking lot space information acquisition system.
3) Electronic police traffic lights snap shot system.
4) Traffic monitoring system.
Automatic Ground Vehicle Loop Detector Application
JUTAI Automatic Ground Vehicle Loop Detector Ordering Informations
LD-100 Single channel vehicle loop detector with 100-240V
LD-102 Single channel vehicle loop detector with 12-24V
LD-200 Double channel vehicle loop detector with 100-240v
LD-202 Double channel vehicle loop detector with 12-24v
JUTAI own extensive knowledge, rich experience, and high-quality products in this field to serve our customers. We expect to make progress and develop with our customers!