Inductive Gate Loop Controller For Driveway Gate Boom Gate System

Inductive Gate Loop Controller Description

Jutai is a professional vehicle inductive dual channel loop detector controller supplier, this dual channel oop detectors can connect to your gate control panel and allows your gate to open automatically when a vehicle enters the 'Loop' hidden in your drive. This vehicle induction loop presence detector works in conjunction with all our gate systems. It can be used to trigger the gate opening or fitted for protection, to prevent the gate from closing.       

Inductive Gate Loop Specifications

• Self-turning range: 20-2000μH
• Sensitivity :8 way selectable / Highest 0.015% DL/L  /  Lowest 0.8% DL/L   
• Frequency: Four steps switch selectable 20-80KHz
• Power Requirements : 110-240VAC (48 to 62Hz) / 12-24VADC(48 to 62Hz)
• Operation Temp : -40℃ to +70℃ / (-111℉ to +158℉)
• Fault Output Blinks slowly: It maybe because the loop is short circuit or the no:of turns is not enough Blinks faster: It maybe because the loop is open or the no: of turns is too many.
• Response Times : 10-90MS
• Visual Indications Power LED-Red /Channel LED-Green
• Reset : Reset by push button on front of enclosure
• Relay Output: Presence Relay/Fault Relay
• Humidity : Up to 95% relative humidity without condensation
• Circuit Protection Conformal coating over the PCB and all components
• Loop wire: more than 10meters requires the use of a 2 core shield cable,do not exceed 30 meters distance between control box and loop
• Size:75mm*43mm*110mm

Dual Channel Loop Detectors Switch Instruction

1. Sensitivity and frequency of the loopcan be adjusted by 7-way dip switch and 10-way Dip switch setting.
2. User can select 8 different setting by changing the setting of the dip-switch to different modes as in the Dip-switch setting tables below.Dip switch 6,7 and 8 for CH1 sensitivity selection with 0.8 being the least sensitive and 0.015 being the most sensitive.
3. Dip switch 3,4 and 5 for CH2 sensitivity selection with 0.8 being the least sensitive and 0.015 being the most sensitive.

Faceplate LED indicators

Red –Power; Green –Loop/Fault:

1. Undetect  -off
2. Detect – on steady
3. Fault – flashing

Faceplate Setting

1. Sensitivity
2. Filter
3. ABS

Why you choose JUTAI Inductive Gate Loop?

1. Stable products.( 2 years warranty)

2. OEM Brand, Logo, Label available

3. 24*7d at your service to give you best support

4. Detailed installation manual and writing diagram to make everything be easy, video to show you how to use our loop detector if necessary.

5. Fast finishing time for you to become more competitive at your local market. 1-3 days for a small order.

6. Standard:GB2003-14887,CE

7. Well-packed with K Carton +EPE

8. Delivery on time&Support shipping via UPS/DHL/FEDEX/EMS/Sea &air,etc.

FAQ:

Q1: Can I get some samples?

A: Yes! sample orders are welcomed.

Q3: Can I change color or the design?
A: Yes, customized color or design is available. 

Q4: What's the delivery time?
A: A week for sampel,15-30days for mass production.

Q5: What's the payment way?
A: T/T bank transfer, Western Union, PayPal

Q6: Can I trust you?
A: Absolutely yes, we are Alibaba verified supplier.

Q7: May I visit your factory?
A: Sure, anytime is welcome. We are located in
5th floor, mingjinhai complex building, Zhoushi Road, Shiyan Town, Ban District, Shenzhen City, Guangdong Province, China.

Q8: What is lead time if we place an order?
If we have the order in stock, it would be 5 working days.
If we don’t have the order in stock, it would be 5-10 days.

Q9: How to make payment?
T/T, Paypal, Western Union, L/C is acceptable.

Q10: What is the Inductive Gate Loop delivery way?
DHL, UPS, Fedex, TNT ,EMS, DTDC etc.
We will choose the safe and cheapest way for you to reduce your cost.
Economic shipping way: by sea, by air transport.
For mass order, shipping by sea or by air transport will be good choice.