Boom Barrier Gate Operator With Waterproof And Rustproof 2mm Cold Rolled Steel Palte
Traffic Boom Barrier Gate with Waterproof And Rustproof
Traffic boom barrier gate housing cover usually is waterproof and rustproof. There are many colour available, such as orange, red, blue, yellow, black and so on. Choose the traffic boom barrier gate operator with waterproof and rustproof from the best barrier gate supplier from China. JUTAI barrier gate operator is hot sale in the over the world.
Name: Automatic boom barrier
Colors: Orange, yellow, blue, red, customized
Operating temperatures: -25 to 75°C
Net weight: 48kg
Packing size: 1,020*365*467mm, weight 50kg
Usage: Highway, parking lot, community, hotel and factory
Cold roll plate, Galvanized plate or stainless steel
varnish baking, 3 years without fading
|Running Time||1.5s, 3s, 6s|
|Operating Temperature||-45°C to 75°C|
|Voltage||220V ± 10%, 110V ± 10%|
|Relative Humidity||<90% coagulation free|
|Boom length||Max 6 meters|
|MCBF||≥5, 000, 000 times|
Straight arm: Mar 1-6 meters optional,
size 45×100mm aluminum alloy.
Folding arm: 90°folding arm / 180°folding arm, aluminum alloy
Fence arm: Two or three fence arm,
Mar1- 6 meters, aluminum alloy
|Related accessories||infrared sensors, loop detectors, traffic light, UHF readers|
|Application||Parking Lots, Toll Gates, Goods Yards, Railway Crossings,
Commercial Premises, Apartment Block
|Traffic light||100mm traffic led light|
Fast Barrier Gate operator adopts special machine core, swing away boom holder and boom. This barrier gate runs in high speed but stably. The running time is 1 second. It can be used for highway toll, parking system, factory gate, and so on.
Functions & Features
a. Motor cooling fan to avoid the over-heating possibility
b. Barrier motor with die-casting aluminum alloy is high-hermetic and easy for heat dissipation
c. Manual release device to operate the barrier when power failure
d. Automatic reversing when the barrier boom meets the obstruction
e. Auto closing realization through menu setting on the control panel
f. The barrier works well with infrared photocells, loop detectors, card readers, ticket dispensers, manual switch (wire control), and traffic light
g. RS485 Communication Module is compatible
h. Machine core with compression spring, effectively avoids the accidents caused by spring breaking.
1. Loop detector: single loop detector or dual channel loop detector
2. Infrared Photocell sensor
3.Barrier gate controller board
4.Traffic LED light
5. RFID reader
What can we do for our customer?
Service for free:
1. One year free service is supplied(not including the arm)
2. Lifetime charged service is supplied
3. Technical service is supplied
4. OEM: we can customized machine case, color, logo for you, which accroding to your detailed requirements.
5. Technical support and aftersales service, it is a long term relatioship between us.
6. Price can be negotiable when you have big order quantity.
Service for charging:
1. Broken by wrong installation
2. Broken by improper voltage
3. The surfaces of the barrier destroyed by wrong installation and usage
4. Overdue service items are out of our promise.
Common Malfunctions and Solutions
1 The arm is no reaction when connect the power and press the open/close key.
a: Check the controller’s power supply and fuse.
b. There is no battery or power shortage on the remote control, the distance is too far.
c.There is co-frequency interference in the vicinity, check with the wire control interface to see if it’s normal.
d. The external protection circuit has failed or in a protected state,check the infrared device or loop detector device.
e: Check the motor and capacitor to see if invalid.
2 The boom could not raise up or fall down when press the open/close key.
a: The photoelectric limit is on bad contact,check the connections.
b: Replace the photoelectric limit switch.
3 The motor is buzz,boom is no reaction when press the open/close key.
a:The voltage is insufficient,check the 220V power supply.
b:The gears are stuck, and hand wheel rotates several circles toward the loose place, and re-adjust the photoelectric limit to prevent the struck caused by mechanical limit from being before the photoelectric limit.
c: It’s imbalance between the balance spring and boom,re-adjust it.
4 The boom is not horizontal and vertical.
a: The photoelectric limit is shaft,re-adjust and fix.
b: Check the connection rod and adjust the boom to horizontal and vertical,and make the photoelectric limit acts before the mechanical limit.
5 The force for arm up become smaller,sometimes need the handle assistance to make it up.
a: Check the motor and capacitor.
b: Re-adjust the spring balance.