Parking Folding Gate Automation System Boom Gate Barrier for Parking System
Parking Folding Gate Automation Barrier Operator for Parking System with CE Approved
Parking Folding Gate Automation barrier arm lengths can be up to 6m, dependent upon your requirements.As a leading barrier gate operator manufacturer,we are able to offer best barriers to suit client specification, such as matching corporate colors. Quality control is a top priority, so we are vigorously test our boom barriers to ensure long service left in the field. The design is the result of years of experience,combining the latest technology with proven, tried and tested methods.The result is a superior product, giving long service left and peace of mind.
Parking Folding Gate Automation Operator Detail
Name:Parking barrier gate Automation System
Speed:1s,1.8s.3s 6 seconds
Certificate:CE, ISO, SGS
Gate Barrier Operator for Parking SystemSpecifications
Cold roll plate, Galvanized plate or stainless steel
varnish baking, 3 years without fading
|Running Time||1.5s, 3s, 6s|
|Operating Temperature||-45°C to 75°C|
|Voltage||220V ± 10%, 110V ± 10%|
|Relative Humidity||<90% coagulation free|
|Boom length||Max 6 meters|
|MCBF||≥5, 000, 000 times|
Straight arm: Mar 1-6 meters optional,
size 45×100mm aluminum alloy.
Folding arm: 90°folding arm / 180°folding arm, aluminum alloy
Fence arm: Two or three fence arm,
Mar1- 6 meters, aluminum alloy
|Related accessories||infrared sensors, loop detectors, traffic light, UHF readers|
|Application||Parking Lots, Toll Gates, Goods Yards, Railway Crossings,
Commercial Premises, Apartment Block
|Traffic light||100mm traffic led light|
(1) Free-maintenance torque motor ensures 100% duty cycle operation with 2 million MTBF.
(2) Easy installation and maintenance reduces your labor cost.
(3) Anti-collision mechanism will protect the boom arm not to be damaged once boom arm was collided by vehicle.
(4) Anti-hit by pressure resistance bounce.
(5) Motor over-current protection,steady,low noise,fast speed.
(6) Manual release function.
1. Loop detector: single loop detector or dual channel loop detector
2. Infrared Photocell sensor
3.Barrier gate controller board
4.Traffic LED light
5. RFID reader
What can we do for our customer?
Service for free:
1. One year free service is supplied(not including the arm)
2. Lifetime charged service is supplied
3. Technical service is supplied
4. OEM: we can customized machine case, color, logo for you, which accroding to your detailed requirements.
5. Technical support and aftersales service, it is a long term relatioship between us.
6. Price can be negotiable when you have big order quantity.
Service for charging:
1. Broken by wrong installation
2. Broken by improper voltage
3. The surfaces of the barrier destroyed by wrong installation and usage
4. Overdue service items are out of our promise.
Common Malfunctions and Solutions
1 The arm is no reaction when connect the power and press the open/close key.
a: Check the controller’s power supply and fuse.
b. There is no battery or power shortage on the remote control, the distance is too far.
c.There is co-frequency interference in the vicinity, check with the wire control interface to see if it’s normal.
d. The external protection circuit has failed or in a protected state,check the infrared device or loop detector device.
e: Check the motor and capacitor to see if invalid.
2 The boom could not raise up or fall down when press the open/close key.
a: The photoelectric limit is on bad contact,check the connections.
b: Replace the photoelectric limit switch.
3 The motor is buzz,boom is no reaction when press the open/close key.
a:The voltage is insufficient,check the 220V power supply.
b:The gears are stuck, and hand wheel rotates several circles toward the loose place, and re-adjust the photoelectric limit to prevent the struck caused by mechanical limit from being before the photoelectric limit.(Parking Folding Gate Automation )
c: It’s imbalance between the balance spring and boom,re-adjust it.
4 The boom is not horizontal and vertical.
a: The photoelectric limit is shaft,re-adjust and fix.
b: Check the connection rod and adjust the boom to horizontal and vertical,and make the photoelectric limit acts before the mechanical limit.
5 The force for arm up become smaller,sometimes need the handle assistance to make it up.
a: Check the motor and capacitor.
b: Re-adjust the spring balance.