Weather-Resistant Design and Clear Visibility for Outdoor Parking Environments

Outdoor parking facilities require traffic signaling equipment that can withstand changing weather conditions while maintaining clear and recognizable instructions for approaching vehicles. The JUTAI JD112HF-C IP65 Waterproof 100mm LED Traffic Light is engineered for parking entrances, exit lanes, commercial garages, residential access points, and other outdoor vehicle management applications. Featuring a compact red and green dual-signal configuration, this industrial traffic light provides effective visual guidance for drivers entering or leaving controlled areas. Its IP65-rated enclosure offers complete protection against dust ingress and resistance to water jets, making it suitable for locations exposed to rain, airborne dust, and everyday environmental conditions. The robust ABS+PC housing provides structural durability, while the protective sun visors help shield the signal lenses from direct sunlight. Unlike traditional traffic signals equipped with numerous small LED beads, the JD112HF-C utilizes a single high-power LED within each 100mm light module. Light is distributed through a specially designed tinted optical lens, producing a smooth, evenly illuminated signal surface without prominent individual LED points. With a luminous intensity exceeding 100 cd per color, the high-power red green LED traffic signal delivers excellent visibility during daylight operation. The colored lens construction also helps minimize the sun phantom effect, which occurs when reflected sunlight creates the misleading appearance of an illuminated signal. This combination of optical performance and weather-resistant construction makes the JD112HF-C a dependable choice for parking facilities requiring consistent traffic indications throughout daily operations.

Flexible Parking System Integration with Efficient Long-Term Performance

Beyond its weatherproof construction, the JD112HF-C is designed to simplify traffic signal integration across different parking management and vehicle access control installations. The 100mm LED traffic light for outdoor parking systems can be connected to compatible automatic barrier gate controllers, allowing red and green indications to operate according to the configured entrance or exit control sequence. For example, a red light can indicate that a vehicle should remain stationary while the barrier arm is lowered, whereas a green light can confirm that passage is permitted once the barrier reaches its designated open position. This signaling arrangement is particularly useful at ticket-controlled parking entrances, RFID vehicle access lanes, commercial building driveways, and industrial parking areas where drivers require immediate visual confirmation. To accommodate different electrical requirements, JUTAI provides 12–24V DC and 85–265V AC versions, supporting integration with a variety of existing control systems. The JD112HF-C is also compatible with suitable JUTAI BR-110 and A6, A8, and A9 series barrier controllers. Each LED module consumes less than 5W, helping operators manage electricity costs in facilities where traffic signals operate for extended periods. Its rapid switching response of less than 75 milliseconds supports timely signal changes, while the operating temperature range of -40°C to +70°C allows installation across diverse climatic environments. By combining efficient illumination, simplified LED construction, and durable enclosure materials, the JD112HF-C offers a practical alternative to conventional multi-LED traffic indicators. Backed by a 5-year warranty, this high-brightness parking traffic light is available directly from JUTAI for parking equipment distributors, access control contractors, system integrators, and OEM manufacturers seeking reliable outdoor signaling solutions.

Traditional LED traffic lights typically use multiple small LED beads arranged in a matrix. While this design can provide sufficient brightness, the large number of individual LEDs also introduces multiple potential points of component failure.

The JUTAI JD112HF-C features a different optical approach.

Each 100mm signal module incorporates one high-power LED light source, which works together with a specialized optical lens to achieve concentrated light output and uniform illumination.

By reducing the number of individual LED light sources, this design simplifies the lighting structure and reduces the potential for isolated LED failures commonly associated with multi-LED arrays.

Combined with an efficient LED driver and carefully selected components, the JD112HF-C is designed for consistent illumination and long-term operation.

Key advantages:

• One high-power LED per 100mm signal module

• Simplified LED lighting structure

• Reduced potential for individual LED failures

• Consistent and uniform light distribution

• Low maintenance requirements

• Designed for long-term industrial operation

The JD112HF-C uses a specially designed tinted optical lens to distribute light evenly across the entire signal surface.

Instead of displaying numerous individual LED points, the illuminated signal appears as a bright and continuous red or green circular surface.

This optical design improves the visual appearance of the signal and provides clear recognition for drivers and equipment operators.

The colored lens also maintains a recognizable signal color when the light is switched off, helping create a consistent appearance under different lighting conditions.

Optical design advantages:

• Even light distribution across the signal lens

• No obvious individual LED dots

• Clear and vivid red and green signal colors

• Reduced uneven brightness and dark spots

• Improved visual appearance compared with conventional LED arrays

Industrial traffic signals are frequently installed in areas exposed to sunlight, including warehouse entrances, loading docks, parking exits, and factory vehicle lanes.

Under strong daylight conditions, conventional low-brightness traffic lights may become difficult for drivers to recognize.

The JD112HF-C is equipped with a high-power LED optical system delivering a luminous intensity of more than 100 cd per signal color.

The combination of a high-flux LED light source and tinted optical lens provides strong signal visibility while helping reduce the sun phantom effect, where sunlight reflection can make an inactive traffic signal appear illuminated.

This makes the JD112HF-C a suitable choice for both indoor and outdoor industrial traffic control applications.

Designed for:

• Outdoor installations exposed to daylight

• Industrial entrances and loading docks

• Warehouse vehicle passages

• Parking entrance and exit control

• Factory traffic management systems

One high-power LED is integrated into each 100mm signal module, delivering concentrated illumination with a simplified lighting structure.

The specially designed optical lens distributes light evenly, creating a bright, consistent signal surface without obvious individual LED dots.

Colored red and green lenses improve signal recognition and help reduce unwanted reflections from sunlight.

The IP65-rated enclosure provides protection against dust and water jets, making the traffic light suitable for outdoor and industrial installations.

Manufactured with ABS+PC material, the housing combines structural strength and durability for demanding industrial environments.

Each light module consumes less than 5W, helping reduce electricity consumption during continuous or frequent operation.

With turn-on and turn-off response times of less than 75 milliseconds, the JD112HF-C supports responsive signal switching in automated traffic control applications.

Designed to operate in temperatures from -40°C to +70°C, making it suitable for various industrial environments and climatic conditions.

Available in 12–24V DC and 85–265V AC versions, allowing integration with different electrical systems and industrial controllers.

As part of JUTAI's high-power LED traffic light series, the JD112HF-C is backed by a 5-year warranty, providing greater confidence for equipment manufacturers, system integrators, and long-term installations.

The JUTAI JD112HF-C is designed for a wide range of industrial and commercial applications where clear red and green traffic indications are required.

High-speed doors are widely used in factories, warehouses, cold storage facilities, and logistics centers.

The JD112HF-C can be integrated with compatible industrial door control systems to indicate when vehicles are permitted to enter or leave a doorway.

Loading docks require clear communication between truck drivers and warehouse personnel during loading and unloading operations.

The JD112HF-C can be connected to compatible automatic barrier gate controllers to provide visual indications of barrier operating status.

For example, the signal can display red while the barrier is closed and green when the barrier is fully open, depending on the controller configuration.

In commercial parking facilities, industrial parks, and private vehicle entrances, traffic lights help manage vehicle movements and indicate when drivers may proceed.

Industrial facilities often have narrow vehicle passages, shared access lanes, or areas where forklifts and trucks need to operate in an organized manner.

Combined with compatible controllers and weighing equipment, red and green signals can indicate when a vehicle should stop, wait, or proceed.

This makes the traffic light a flexible signaling component for different industrial automation applications.

The JD112HF-C is available in both AC and DC versions to accommodate different power supplies and controller configurations.

The AC version supports a wide input voltage range and can be connected to compatible traffic light control outputs.

When used with the JUTAI BR-110 barrier gate controller, the traffic light can be controlled through the dedicated Red (R), Green (G), and Common (COM) output terminals.

The controller can switch the traffic signals automatically according to the barrier gate operating status.

The DC version supports 12–24V DC power input and can be controlled through external relay outputs.

It can be integrated with JUTAI A6, A8, and A9 series barrier gate controllers using compatible COM, NO, and NC relay contacts.

An external 12–24V DC power supply is recommended for stable operation.

The exact wiring configuration should follow the controller model and corresponding installation diagram.

The JD112HF-C can be integrated with:

• Automatic barrier gate controllers

• Industrial door control panels

• Parking access control systems

• Vehicle detection and traffic control systems

• Relay-based industrial automation equipment

• Loading dock traffic management controllers

The traffic light functions as a visual signaling device and can be used with compatible external controllers to implement different signal-switching logic.

JUTAI is a Shenzhen-based manufacturer specializing in sensors, vehicle access control equipment, and industrial traffic management products.

Our product range includes industrial door sensors, vehicle loop detectors, radar vehicle detectors, LED traffic lights, automatic barrier gates, and related access control equipment.

With manufacturing experience and a focus on industrial applications, JUTAI provides practical and reliable solutions for equipment manufacturers, system integrators, and distributors.

The JD112HF-C is developed around the requirements of real industrial environments, including strong daylight, frequent signal switching, outdoor exposure, and long-term operation.

Its high-power LED optical system, durable housing, and flexible electrical options make it suitable for integration into different traffic control systems.

JUTAI focuses on consistent manufacturing quality and product reliability to support long-term use and repeat orders.

The JD112HF-C high-power traffic light series is supported by a 5-year warranty, offering additional value for customers looking for dependable industrial signaling products.

JUTAI welcomes cooperation with industrial door manufacturers, automatic barrier gate suppliers, parking system integrators, access control distributors, and industrial automation companies.

OEM branding and customization options can be discussed according to project requirements and order quantities.

We provide factory-direct supply, technical documentation, and product support for international customers.

The JD112HF-C uses one high-power LED per 100mm signal module combined with a specially designed tinted optical lens. Conventional LED traffic lights commonly use multiple small LED beads arranged in a matrix.

The JD112HF-C provides uniform illumination without obvious individual LED dots and uses fewer individual LED light sources, which helps simplify the lighting structure.

Yes. The JD112HF-C is designed for high-brightness applications and features an optical lens intended to provide clear signal recognition and reduce sunlight reflection effects.

Its IP65 protection rating also makes it suitable for outdoor installations.

Yes. The JD112HF-C is available in 12–24V DC and 85–265V AC versions.

Customers should select the appropriate version according to their controller output and installation requirements.

Yes. The JD112HF-C can be connected to compatible barrier gate controllers, including JUTAI BR-110 and A6/A8/A9 series controllers.

The red and green signals can switch according to the controller's operating logic.

The 100mm JD112HF-C uses one high-power LED per signal module.

The larger 200mm high-power traffic light version uses three high-power LEDs per signal module.

JUTAI provides a 5-year warranty for the high-power LED traffic light series.

Yes. The JD112HF-C is suitable for industrial doors, loading docks, warehouse entrances, parking systems, and other applications requiring red and green traffic indications.

It can be connected to compatible external controllers to implement different signaling requirements.

Looking for high-brightness LED traffic lights for your industrial door, parking, or vehicle access control projects?

JUTAI provides manufacturer-direct supply, technical assistance, and OEM cooperation for customers worldwide.

Whether you require samples for evaluation, wholesale quantities, or traffic light solutions integrated with your existing equipment, our team is ready to support your project.

Contact us for technical information, product quotations, or distribution opportunities.

Email: marketing@jutaigateaccess.com

Website: www.jutaigateaccess.com