wireless photocell sensor can be powered with 12/24dc
wireless photocell sensor can be powered with 12/24dc for access control
What is a wireless photocell sensor?
Photoelectric safety sensors for personnel safety.Together with the appropriatesafety control units, active photoelectric protective devices such as safety thru-beam sensors and safety light grids ensure that a stop is applied on detection of unauthorized access or if someone reaches into a danger zone.JUTAI IR-20M infrared photo beam sensors with 20m distance for sliding gate.
WIS-30 wireless photocell sensor gate safety beam with a wireless transmitter and it makes short work of achieving a safe automation system for even the most challenging of installations. With a wireless transmitter there’s no need to tunnel under the driveway. Simply align, More convenient and safe for door automation!
JUTAI's infrared photo beam installation is very simple, it is compatible with 12VAC / DC and 24VAC / DC voltage, no matter what voltage your door machine is, a product can be easily handled, reducing inventory pressure. In addition, Haotai's infrared radiation support one-on-one working state and one-to-many working state. If the case is one-to-one, we provide a jumper cap. Just insert the jumper cap according to our operating instructions. The location, and the operating current in AC mode, makes it easy to implement the functional mode you want.
WIS-30 infrared gate safety beam with a wireless transmitter and it makes short work of achieving a safe automation system for even the most challenging of installations. With a wireless transmitter there’s no need to tunnel under the driveway. Simply align, More convenient and safe for door automation!
1.The transmitter is wireless and battery-operated saving time and money.
2.30 meters operating range – ideal for almost any entrance gate.
3.Fully ant-proof and weather-resistant enclosure for greater reliability.
4.Transmitter provides audible feedback for easy setup and battery-low indication.
5.Low power consumption throughout the system for greater efficiency.
6.Compatible with Intruder-detection Alarms for enhanced perimeter security.
7.Quick, easy installation with built-in laser beam alignment system.
1.Boom barrier gate safety application
3.Gate opener system
4.Security Alarms and Warnings system
6.Gate operator safety accessories
|Power Supply Transmitter||2 x AA Alkaline Batteries (Supplied) Only replace with alkaline batteries; do not use rechargeable batteries with this product|
|Receiver||12 - 24V AC 12 - 30V DC|
|Receiver Power Consumption||30mA @ 12V DC|
|Transmitter Battery Life||Minimum 2 years|
|Battery Low Indication||Audible Beep|
|Specified Operating Distance||30m|
|Alignment||Automatic – 1m² @ 10m (circular area - assumes parallel surface)|
|Output Contact||Fail-safe, N/C and N/O, potential free contact|
|Output Contact Rating||3A @ 30V DC Non-inductive|
|Operating Temperature||-20°C - +60°C|
|Operating Humidity||0 - 90° Non-condensing|
|Degree of Protection||IP65 with rubber|
wireless photocell sensor display