RFID Reader For Parking System Passive UHF RFID Reader
RFID Reader Support ISO18000-6C(EPC/GEN2) With 12V Power Supply
Jutai RFID UHF long range reader support ISO18000-6C(EPC/GEN2) protocol, which can use for parking system passive UHF RFID System. After reader powered card reader immediately into the search mode or trigger mode and receive data packets from the electronic tags, and then output signal to the gate controller. JUTAI passive UHF long range reader supplier offers a complete package of the reader, including the power supply and hole, etc.
Technical Parameter Data
|Name: RFID Reader Support ISO18000-6C(EPC/GEN2) Protocol Can Use For Parking System Passive UHF RFID Reader|
|Frequency Hopping Mode: Fixed Frequency Band and FHSS Software Programmable|
|RFAntenna:12dBi circular polarize antenna (Integrated)|
|Read/Write Range:Max Read Range:20m;Max Write Range:6m;Distance depends on Reader&Antenna output Power|
|Operating Mode: Master-Slave Mode(Online Mode)/Time Scheduled Modes/Trigger Mode|
|communication port:RS232;WiegandInterface:Wiegand26&Wiegand34Supported;RS-485;10/100MEthernet,GPRS/WIFI(forCustomized Model only)|
|Operation-25 Degree to 70 degree|
|Storage-45 degree to 85 degree|
|Power Supply: DC9V-DC12V|
|Brackets: Pole Mount Adapter|
|Software Pack(Optional): API Software Development Kits complete|
Antenna Polarization Of UHF long range Reader
UHF long range Reader Cables Instruction
- Red: +DC9V
- Black: Ground
- Green：Wiegand DATA0
- Blue：Wiegand DATA1
- Purple：RS485 R+
- Orange：RS485 R-
- Brown：RS232 RXD
- White：RS232 TXD
- Grey：Trigger input（TTL level）
Card Reader Commissioning
Readers should not face to each other to avoid reading conflicts.
The distance between two readers is at least 2.5m
U-shaped mounting bracket can be used to adjust the angle of the reader in order to achieve the best reading distance.
RFID Reader Operation
Power up: When powered on, the buzzer will 'Didi' even rang twice, then the device to work. If you do not hear the sound, check the power supply is connected correctly.
Reader Test: Let the cards in front of the reader to move around. After reading card Number, the buzzer will sound and the red LED will blink inside the panel.
Do not stick the card in the palm of the hand or on the body, and do not use the card posted on the metal object, it will affect the reader results.
Distance Between Windscreen And Card
Best distance between car windscreen and card minimum 10mm clearance. A card should not attach directly to the windscreen surface.
Parking System Passive UHF long range Reader Application Diagram
RFID Tag ISO18000-6C(EPC/GEN2) Protocol
Parking System Passive RFID Reader Projects Reference