Low Voltage Dual Channel Loop Detectors For Gate Access Automatic Gate Opener

Low Voltage Dual Channel  Loop Detectors For Gate Access Automatic Gate Opener

Jutai offers multi-type voltage vehicle loop detection sensors 110-240VAC and 12-24VADC, which can reduce inventory costs by stocking and transporting just one universal unit. Jutai supplier is your best choice to purchase dual channel loop detectors for controlling the FAAC BFT CAME Gate Barriers. Jutai insists on providing the best service for our global customers, also offer OEM brand if any requirements, in order to help our customer to do their own brands.

Low Voltage Dual Channel Loop Detectors Features

1. Compact Size: the compact and well-engineered housing, Combines all of the industry requirements regarding Features and functionality and allows this detector to be Incorporated into any or existing traffic detection system.
2. Diagnostic Capabilities: Comprehensive diagnostics Capabilities allow for accurate diagnosis of loop and Installation problems.
3. Selectable Presence Time: The output of the presence relay can be selected to limit a detect output to a fixed time(time>30 minutes)while a vehicle remains on the loop.
4. Loop Frequency Indication: Interference between adjacent loop/detectors can be determined by an integral indication, and eliminated by changing the frequency setting.
5. Direction Detection : (If the vehicle moves from CH1 to CH2, then CH1 relay output; if the vehicle moves from CH2 to CH1, then CH2 relay output).
6. Sensitivity Selection: Sensitivity and frequency of the loop can be adjusted by 7-way dip switch and 10-way dip switch setting.

Modes of operation

The LD-200 series detector may be configured for any one of the following modes: 

• Presence Mode
• Pulse Mode
• AB Logic Presence Mode(Barrier Operation)
• AB Logic Pulse Mode(Counting Logic)

Low Voltage Dual Channel Loop Detector Specifications

• Loop Inductance : 20-2000μH
• Sensitivity: 8 way selectable / Highest 0.015% DL/L  /  Lowest 0.8% DL/L   
• Frequency: Four step switch selectable 20-80KHz
• Power Requirements : 110-240VAC (48 to 62Hz) /   12-24VADC(48 to 62Hz)
• Operation Temp : -40℃ to +70℃ / (-111℉ to +158℉)
• Fault Output Blinks slowly: It maybe because the loop is short circuit or the no:of turns is not enough Blinks faster: It maybe because the loop is open or the no: of turns is too many.
• Response Times : 10-90MS
• Visual Indications Power LED-Red /Channel LED-Green
• Reset : Reset by push button on front of enclosure
• Relay signal: presence signal or pulse signal
• ABS: automatic sensitivity boost
• Direction detection: CH1 and CH2 flow direction detection
• Loop frequency: 4 setting(low,Med-low,Med-Hi,High)
• Humidity : Up to 95% relative humidity without condensation
• Circuit Protection Conformal coating over the PCB and all components
• Connections: Socket mount-11pin male(JEDEC B11-88)
• Size:75mm*43mm*110mm

Faceplate LED indicators

Red –Power; Green –Loop/Fault:

• Undetect  -off
• Detect – on steady
• Fault – flashing

Faceplate Setting:

• Sensitivity
• Filter
• ABS
• Entry/Exit
• Presence Time
• Frequency

Low Voltage Dual Channel Loop Detectors Application

• Automatic Gate
• Traffic Light System
• Gate Drive Mechanisms
• Operating Barriers
• Parking Guidance System
• Activating Card Dispensers in Parking Lots.