Vehicle Loop Detector Wire 305m For Parking Barrier Gate Arm Closing System
Vehicle Loop Detector Wire With Long using Life
A long using life loop wire can make sure your projects more safety and reduce construction troubles.JUTAI made 20-2000uH single channel loop detector value, If the current source is removed, the metal into the detection loop cable trying to maintain the current flow. By winding the coil, the magnetic field is enhanced, which increases the inductance. Single channel loop detectors are used with gate operator systems to detect vehicles entering and exiting the area and access control situation.
Single Channel Vehicle Loop Detector Wire 305m Specifications
Temperature: -65℃ to +200℃
One Roll Length: 300m
Material: Silicone rubber and standard silver plated copper wire
Color: Red and Black
Single Channel Vehicle Loop Detector Wire Characters
- It has excellent corrosion resistance oil resistance, strong acid, strong alkali resistant to high voltage.
- Small loss at high frequency, no moisture absorption, insulation resistance;
- It has excellent flame resistance, aging resistance, long service life.
Advantages of Inductive Loop Detector and Loop
JUTAI provide more safety more stable Vehicle Loop Detector. Compare with other brand vehicle loop detectors, Only very stable working in one extreme value. Another extreme value, the work is not very stable. However, Our loop detector solves this problem. It's successfully and stable working in maximum inductive 2000uh and minimum inductive 20uh. If intermittence happens or failed loops get self-restored, the detector will resume to normal operation without manually reset the detector.
All permanent loop installations should be installed in the roadway by cutting slots with a masonry cutting disc or similar device. A 45° crosscut should be made across the loop corners to reduce the chance of damage that can be caused to the loop wire insulation at right angle corners.
Loop detectors are used to detect the presence of vehicles. The loop is connected to the detector. find more LD-100 loop detector specifications here
Exit loops are used to open gates to allow a vehicle's exit.
Safety loops are used to prevent a gate from closing on a vehicle. Two loops can be wired to one detector. This is frequently the case in safety loops. Loops are placed in front and behind the gate.
Shadow Loops are typically used in commercial locations. They close the gate as soon as a vehicle passes over them deterring other vehicles from tailgating in behind them.
The company's main products
IC/RF ID/magnetic cards and RFID card readers, automatic card, vehicle loop detector, photocell beam sensors, vehicle loop detector wire, LED traffic light with barrier gates, parking vehicle access control system, parking management system, door access control management. We own extensive knowledge, rich experience, and high-quality products in this field to serve our customers. We expect to make progress and develop with our customers!