Nice Inductive Vehicle Loop Detector For Traffic Access Control System Boom Gate
Nice Inductive Vehicle Loop Detector Car Parking Detection Gate Access
JUTAI is a single channel loop detector importer from China, also well known as parking gate access control supplier, so create the loop sensors for many applications, such as parking, Highway Toll Station and traffic signal control, etc. The detector is a single channel loop detector, which only can simultaneously monitor an inductance coil. It has two relays to output signals, so the user can choose a different output signal to control the mechanical drive, the card device or vehicles counting.
Nice Inductive Vehicle Loop Detector Technical Parameter
|Technical Parameter for single channel vehicle detector|
|Sensitivity||16-way selectable levels|
|Visual Indications||Power LED-Red, Channel LED-Green|
|Frequency||Four step switch, selectable 20-80KHz|
|Relay time||0,2,4,8,10,15,20,30 seconds|
|Fault Output||Blinks slowly, Blinks faster|
|Reset||Reset by a push button on the front of the enclosure|
|Label Language||English, OEM logo printing|
|Connections||11-pin Submagnal(USA sytle and European)|
|Storage Temperature||-40 to 80 Celsius degree|
|Normal Working Temperature||-40 to 70 Celsius degree|
|Safety Approval||CE, FCC, CCC|
Nice Inductive Vehicle Loop Detector Operation and Indication
When the power is applied, the red Power LED will glow and the detector is tuning, the green Check LED blink about 3 seconds. The green LED will also glow whenever a vehicle is detected passing over the inductive loop. If a loop fault exists the green LED will come on and flash indicating a fault.
Single Channel Loop Detector 11-Pin Connection Details
Single Channel Loop Detector Feature
1. Compatible with the parking management system.
2. Easy installation and operation.
3. Connects one inductive loop (single channel).
4. Application for Parking lot entrances Vehicle detection, Parking lot space information acquisition system, Electronic police traffic lights snapshot system, Traffic monitoring system etc.
All permanent loop installations should be installed in the roadway by cutting slots with a masonry cutting disc or similar device. A 45° crosscut should be made across the loop corners to reduce the chance of damage that can be caused to the loop wire insulation at right angle corners.
Loop detectors are used to detect the presence of vehicles. The loop is connected to the detector. find more LD-100 specifications here.
Exit loops are used to open gates to allow a vehicle's exit.
Safety loops are used to prevent a gate from closing on a vehicle. Two loops can be wired to one detector. This is frequently the case in safety loops. Loops are placed in front and behind the gate.
Shadow Loops are typically used in commercial locations. They close the gate as soon as a vehicle passes over them deterring other vehicles from tailgating in behind them.
Installation Diagram And Application
Nice Inductive Vehicle Loop Detector installation reference