Double Channel Inductive Loop Vehicle Work With FAAC BFT Barrier Gates Control Board
Double Channel Inductive Loop Vehicle Detector LD205 OEM Service
JUTAI designed dual channel loop detector that can use as two single magnetic vehicle detectors loops, and this type dual channel loop detector has separate directional AB and BA counters, application for a Multiple Inductive Loop Vehicle Detection System, such as parking vehicle counting system, automatic car park barrier gate, etc. JUTAI as a presence detection loop factory, also OEM brand for our global customers.
Dual Channel Loop Detectors Work With FAAC BFT Barrier Gates Control Board Connection Details
Double Channel Inductive Loop Vehicle Technical Parameter
|Self-turning range : 20-2000μH|
|Sensitivity :8 way selectable / Highest 0.015% DL/L / Lowest 0.8% DL/L|
|Frequency :Four step switch selectable 20-80KHz|
|Power Requirements : 110-240VAC (48 to 62Hz) / 12-24VADC(48 to 62Hz)|
|Operation Temp : -40℃ to +70℃ / (-111℉ to +158℉)|
|Fault Output Blinks slowly: It maybe because the loop is short circuit or the no:of turns is not enough Blinks faster: It maybe because the loop is open or the no: of turns is too many.|
|Response Times : 10-90MS|
|Visual Indications Power LED-Red /Channel LED-Green|
|Reset : Reset by push button on front of enclosure|
|Relay Output: Presence Relay/Fault Relay|
|Humidity : Up to 95% relative humidity without condensation|
|Circuit Protection Conformal coating over the PCB and all components|
|Loop wire: more than 10meters requires the use of a 2 core shield cable,do not exceed 30 meters distance between control box and loop|
Double Channel Inductive Loop Vehicle Applications
Jutai Universal-Voltage loop detectors are used wherever vehicles have to be detected. Like monitoring and safeguarding access ways to counting vehicles. The output signal can be used for controlling door and gate drive mechanisms, operating barriers, controlling traffic light systems in car parks or activating card dispensers in car parks.
Picture Of Reference
JUTAI LD-205/206 series is an inductive DUAL channel loop detector with 110-240VAC / 12-24VACD, designed for parking and vehicle access control. The function of the detector is to detect vehicle presence by means of an inductance change caused by the Motorcycle, Small car, Normal car, Lorry, Truck, passing over a wire loop buried under the road surface.
Q1: Can I get some samples?
A: Yes! sample orders are welcomed.
Q3: Can I change color or the design?
A: Yes, customized color or design is available.
Q4: What's the delivery time?
A: A week for sampel,15-30days for mass production.
Q5: What's the payment way?
A: T/T bank transfer, Western Union, PayPal
Q6: Can I trust you?
A: Absolutely yes, we are Alibaba verified supplier.
Q7: May I visit your factory?
A: Sure, anytime is welcome. We are located in
5th floor, mingjinhai complex building, Zhoushi Road, Shiyan Town, Ban District, Shenzhen City, Guangdong Province, China.
Q8: What is lead time if we place an order?
If we have the order in stock, it would be 5 working days.
If we don’t have the order in stock, it would be 5-10 days.
Q9: How to make payment?
T/T, Paypal, Western Union, L/C is acceptable.
Q10: What is the Double Channel Inductive Loop Vehicle delivery way?
DHL, UPS, Fedex, TNT ,EMS, DTDC etc.
We will choose the safe and cheapest way for you to reduce your cost.
Economic shipping way: by sea, by air transport.
For mass order, shipping by sea or by air transport will be good choice.